Dedicated Micros EcoSense Скачать руководство пользователя страница 14

Страница: 14 / 120

oSense

When the unit is powered up, the network address can be found by viewing on a local monitor and

navigating to Configuration Menu pages:System Settings->System->IP Address.
Refer to ‘Configuring The Unit’ for further guidance on locating the unit’s IP address and for details of

the default DNS (Domain Name Server) address.
DNS (Dynamic Name Servers) is supported and therefore the unit can be assigned a name. This

removes the need for the unit to have a fixed IP address and makes it easier for a remote user

to locate.

Step Alarms / Relays

Alarms

The unit supports 17 normally open/closed alarm inputs via the back panel, or one Global keyswitch

input with camera specific inputs configurable as entry/exit alarms.

Note:

The 4 channel unit supports 5 normally open/closed alarm inputs.

Relay Connector

Pin

Alarm Input Connection

1 - 17

1-17

18-21

Earth Common

Содержание EcoSense

























































































































Результаты поиска

Содержание EcoSense

Отзывы:

Dedicated Micros EcoSense, Руководство по установке и эксплуатации, Страница: 14 / 120

Результаты поиска

Содержание EcoSense

Отзывы: