Dedicated Micros EcoSense, Руководство по установке и эксплуатации, Страница: 13 / 120

Dedicated Micros ©2009
1
Ec
oSense
Step Connecting Audio
The unit supports two channels of bi-directional audio, accessible through NetVu ObserVer. Connect
the audio equipment to the phono sockets AUDIO IN and AUDIO OUT. The audio channel defaults
to recording camera 1.
The following modes of operation are supported:
• Challenge – intruders from an RVRC.
• Listen – to local audio from a site at the RVRC.
• Record - local audio from a site with the video.
• Replay - all audio through a local Audio output (not supported when
Audio out is used as a challenge/PA source)
Note: The Audio output can be configured as a challenge output or as a replay output.
Step Connecting to the Network
The unit supports a 10/100Mbps auto-detecting network port. Use a CAT5 cable to connect the unit
to the network.
By default the unit is configured for DHCP i.e. the unit is automatically allocated an IP address from
a network DHCP server.
DHCP works by assigning an IP address at initial connection to the network. It is possible however
that this IP address can change without notification i.e. following power failure. It is therefore
recommended that the unit be allocated a fixed IP address. A fixed IP address can be assigned via
the Configuration Menu pages:Network Settings->Network->IP Address.