Dedicated Micros EcoSense Скачать руководство пользователя страница 70

Страница: 70 / 120

oSense

Network

This menu allows additional network settings to be configured if required.

Server Name

This field can be edited to allocate a name to the unit. This would

be used if accessing the unit via a Domain Name Server (DNS).

IP Address

This is the IP address allocated to the unit.

Sub Net

This is the subnet of the network were the unit is located.

Gateway

This is the IP address of the default gateway (router).

Primary DNS

This is the primary DNS server IP address for applications utilising

domain names.

Max Transmission Rate

Shows the maximum transmission speed for the network type.

Force 10BaseT operation

The unit supports 10 or 100BaseT half duplex transmission.

Selecting this option will force the unit to operate at a 10BaseT

connection.

Tx Image Buffers

This is used in order to improve the picture delivery over Ethernet

when using a slow connection i.e. 256Kbps. A buffer setting of 1,2

or 3 is available.

Ethernet MTU

This is the maximum transmit unit for the Ethernet packet. The

MTU is the largest physical packet size measured in bytes that the

network can transmit. By default this figure is set to 1500bytes.

Mx Transmission Timeout ms

This is the time (in milliseconds) the unit will wait to re-send a

packet if an acknowledgement is not received.

Содержание EcoSense

























































































































Результаты поиска

Содержание EcoSense

Отзывы:

Dedicated Micros EcoSense, Руководство по установке и эксплуатации, Страница: 70 / 120

Результаты поиска

Содержание EcoSense

Отзывы: