manualshive.com logo in svg

Dedicated Micros DV-IP Express, Инструкция по установке и эксплуатации

Поделиться
Скачать
Dedicated Micros DV-IP Express Скачать руководство пользователя страница 9

Dedicated Micros ©2009

D

V-IP Expr

es

s

Electrical Connections

Please ensure the following are available and have been tested prior to the installation:

•�  Mains point

•  Network point 
•  Network cable
•  �cti�e �ideo signals i.e. at least one working camera feed
•  �C with CD RO� dri�e and connection to the same network as the D�-�� ��press unit 

(Recommended). 

Quick Overview of DV-IP Express Record Settings

The DV-IP Express provides as default:

High performance recording on ��� cameras with minimal configuration.
Consistent recording duration and smooth motion �ideo per camera regardless of the number of 

cameras.

Default record settings at MPEG4 5pps (at 2CIF), JPEG 2pps (at 2CIF)  and 

Multi

Mode

 recording at 

���G4 5pps (at 2C�F), J��G 5pps (at 2C�F).  
�re-configured 7, 14, 30 or 60 day storage settings (dependant on model).

Complete Flexibility

The ad�anced record menu can be used to configure indi�idual cameras to suit specific 

requirements e.g. �ntry���it routes. �arious storage sizes are a�ailable dependant on the 

combination of the number of cameras, the storage options and record rates selected.

Note:  

It is the Installer/Owner’s responsibility to ensure that the record duration is set to the 

necessary requirements of the application. 

Multi

Mode

 Recording

The unit supports 

Multi

Mode recording which is a storage technology developed by Dedicated 

Micros. This offers the ability to set different recording rates, resolutions and compression formats 

across scheduled, normal and alarm modes for each individual camera.

By varying the quality, bit rate and file size of the recorded images, the 

Multi

Mode function can 

increase recording capabilities of the unit.

Multi

Mode

 offers:

 

�bility to set different recording resolutions.

 

�bility to set and switch ���G or J��G compression recording as required.

 

�bility to set ��S recording rate per camera.

 

Dynamically switchable resolution when switching from Normal to ��ent recording.

 

Dynamically switchable compression between ���G4 and J��G from Normal to 

 

��ent recording.

Содержание DV-IP Express









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды