Dedicated Micros DV-IP Express Скачать руководство пользователя страница 108

Страница: 108 / 136

V-IP Expr

Point&

enables an Oracle Dome camera to be controlled directly �ia the mouse. Click anywhere

on the displayed image and the Oracle dome camera will centre on that point i.e. to pan the camera

to the right, click on the right hand side of the displayed image. The Oracle dome will pan and set

the clicked point as the centre of the new image.

Note:

To use

Point&

go, PTZ mode must be selected (if available).

Note:

Oracle dome cameras can also be controlled using the Joystick / Directional Control

Buttons on the DM KBC1 / KBC2 Keyboards.

Telemetry Command Options

Telemetry commands can be acti�ated directly �ia the Telemetry Command symbols. To access the

modes and options featured below, roll the US� mouse o�er the camera symbols displayed in the

upper right of the screen. The modes a�ailable will depend on the camera type being accessed.

Note: The symbols shown below will only be displayed if viewing via a local monitor and not

the webpages

Symbol

Mode/Camera Type

Options Available

Fixed Camera

eZoom Use this option to zoom into areas of the image. The camera

itself is not being directly controlled. Use the mouse to select a

point on the image. Use the + and - symbols illustrated below to

zoom in � out.

e�TZ mode

Use this option to zoom into areas of the image. The camera itself

is not being directly controlled. Use the cursor to select a point on

the image. Use the + and - symbols illustrated below to zoom in �

out.

Zoom �N � OUT �hen displayed, use these buttons to zoom in � out of the image.

PTZ Mode

Use this option to directly control an �racle dome camera via the

Point&

feature. Rolling the mouse o�er the icon will display

more Telemetry command options (detailed below).

To cycle through these options, click on the currently displayed

symbol i.e. click on the Zoom symbol to display the

�ris option.

�TZ Zoom �hen displayed, use the + and - symbols to utilise the camera’s

Zoom function.

Содержание DV-IP Express









































































































































Результаты поиска

Содержание DV-IP Express

Отзывы:

Бренды по названию

Популярные бренды

Dedicated Micros DV-IP Express, Инструкция по установке и эксплуатации

Результаты поиска

Содержание DV-IP Express

Отзывы:

Бренды по названию

Популярные бренды