Dedicated Micros DV-IP Express, Инструкция по установке и эксплуатации

Страница: 107 / 136

Dedicated Micros ©2009
10
D
V-IP Expr
es
s
Telemetry Camera Options
The Telemetry camera page allows Oracle Dome cameras to be controlled directly via the Point& go
feature and be sent to preset positions.
The eZoom feature allows navigation within the video image i.e. the image itself is being navigated
and enlarged, the camera is not being controlled. This allows the operator to pan and zoom within
the actual image. This feature is best utilised with high resolution cameras, giving the operator the
ability to electronically zoom into an area. The unit will request a higher resolution image of the
zoomed area to show increased detail.
The functionality available will depend on the type of camera being viewed. The unit will recognise
which camera type is being accessed and display relevant symbols in the top right of the screen
(when viewing via a local monitor only).
Red �reset �f �reset positions ha�e been established for the
�TZ camera, select the �reset option followed
by the rele�ant numeric button or �ia the number
bo� displayed on-screen.
Refer to the ‘PTZ Profile menu’ for further details
on establishing preset positions .
Note: Presets will not work in ePTZ mode.
Green �TZ�e�TZ Switches between �TZ and e�TZ mode. �n e�TZ
mode, it is possible to zoom in�out of and scroll
around the image (the camera itself is not being
controlled).
�TZ mode will control an Oracle Dome camera
via the Point& go feature. R efer to the ‘Point&go’
section for further information.
��ellow �u� �cti�ates the camera �u�iliary controls e.g.
wash, wipe etc. �ress the �u� button followed
by the rele�ant numeric button or �ia the number
bo� displayed on-screen.
�lue �rog Opens the �reset programming menu. Refer to
‘PTZ Profile’ menu .
�urple Ne�t Opens the ne�t page of the �iewer menu.
Note: The above menu options will only be available when viewing a PTZ camera in Live mode.