Dedicated Micros DV-IP Express Скачать руководство пользователя страница 29

Страница: 29 / 136

V-IP Expr

System Settings

The menus under the System Settings heading allow the unit’s core settings to be viewed, changed

and the system software upgraded.

The System option displays details about the unit including the IP address, unit serial number, MAC

address and software version.
The Unit Status page displays information about the unit’s operating condition, shows how long the

unit has been operating and the reason for the last reset. It also shows camera status and displays

any failed cameras.

The Alarm Status page shows which contacts are open, which zones are in alarm and which relays

are operating.
The Language page allows the system language to be set. The language can also be changed for

the current session only.
The Time and Date page allows the unit time and date settings to be adjusted, including setting

the timezone.
The Serial Ports page allows each of the four serial ports to be individually configured for one of a

range of operations, including EPOS, debug, PPP and telemetry.
The Audio page shows the settings available for each of the two audio channels and allows

configuration of audio quality.

The Features page allows control of the different features that are available within the software

including Email reporting, webcam support and control of the display resolution.

The Maintain page allows the current configuration to be saved, and for previously saved settings to

be loaded. It also enables easy upgrade of the system software.

Содержание DV-IP Express









































































































































Результаты поиска

Содержание DV-IP Express

Отзывы:

Бренды по названию

Популярные бренды

Dedicated Micros DV-IP Express, Инструкция по установке и эксплуатации

Результаты поиска

Содержание DV-IP Express

Отзывы:

Бренды по названию

Популярные бренды