Dedicated Micros DV-IP Express, Инструкция по установке и эксплуатации

Страница: 60 / 136

Dedicated Micros ©2009
0
D
V-IP Expr
es
s
Schedule
This menu allows the Timer Function to be configured. The Timer Function enables the unit to
automatically be put into set/unset mode at specific times on specific days. This can help reduce
unnecessary alarm triggers.
When the unit is in Set or Unset mode, combine with different recording qualities and rates under
normal and alarm conditions for a high degree of control in a range of situations.
Note: If Keyswitch is Enabled, the Day Time and Night Time options will not be displayed. The
additional Keyswitch options will instead be displayed.
�ode�Title �nables a name to be entered for Unset, Set and O�erride mode.
Current �ode Shows the current timer mode according to the names entered in
the �ode�Title te�t bo�es.
Day Time �nter the time (using the 24hr clock) when Unset mode will begin.
Night T�me �nter the time (using the 24hr clock) when Set mode will begin.
�eyswitch � �eyswitch can be used to switch the recording profile (Unset�
Set), �f required, select ‘�nable’ then choose a contact to be used
in a specific zone as the �eyswitch.
Note: When the Keyswitch option is set to ‘Enabled’. It is necessary to save (or exit and return to)
the menu. The additional Keyswitch options will then be displayed.
�eyswitch-N�O Select whether the �eyswitch is to be normally open (UNS�T)
�eyswitch �O� Select to configure the �eyswitch for �O�. The End �f Line
(�O�) option enables the �eyswitch to detect any changes in the
electronic input resistance. � change outside the e�pected �alues
will result in a Tamper �larm (short circuit or open circuit) being
detected and the system switching to alarm mode.