DEC 4000 600 series, Руководство пользователя, Страница: 93 / 242

Setting the Language (language)
Change the
Language
To set the language that the system displays on output devices,
do the following:
Step Action
1 Determine the code number for the language you
want system output devices to display.
2 Enter the following:
>>> set language language_code
For example:
>>> set language 3A
This commands sets the display to Spanish.
Changing the Baud Rate (tta0_baud and tta1_baud)
Which Baud
Rates Can I
Change? Two environment variables allow you to change the baud rate of
the console terminal port and the auxiliary serial port from the
console terminal:
• tta0_baud allows you to set the baud rate for the console
terminal port.
• tta1_baud allows you to set the baud rate for the auxiliary
serial port.
The setting of tta0_baud is volatile, that is, if you cycle power on
the system, the value of tta0_baud is overridden by the setting of
the baud rate switch that is located behind the system’s operator
control panel. Refer to Changing the Baud Rate in Chapter 8 for
information about setting the console terminal port baud rate
more permanently.
Setting Environment Variables 4–15