Dea LIVI N Series, Инструкции по эксплуатации и предупреждения

Страница: 13 / 108

EN-1
LIVI/N
Electromechanical operators
for sliding gates
Operating instructions and warnings
Index
1
Warnings Summary EN-1
6
Start-up EN-8
2
Product Description EN-3 6.1 Installation Test EN-8
3
Technical data EN-3 6.2 Unlocking and manual operation EN-8
4
Installation and Assembly EN-4
7
Maintenance EN-8
5
Electrical Connections EN-5
8
Product Disposal EN-9
1 WARNINGS SUMMARY
WARNING! I
MPORTANT SAFETY INSTRUCTIONS
. C
AREFULLY READ AND FOLLOW ALL WARNINGS AND INSTRUC
-
TIONS THAT ACCOMPANY THE PRODUCT SINCE INCORRECT INSTALLATION COULD CAUSE HARM TO PEOPLE
,
ANIMALS
OR THINGS
. W
ARNINGS AND INSTRUCTIONS PROVIDE IMPORTANT INFORMATION REGARDING SAFETY
,
INSTALLATION
,
USE AND MAINTENANCE
. K
EEP THE INSTRUCTIONS TOGETHER THE TECHNICAL DOCUMENTATION AND FOR FUTURE
REFERENCE
.
WARNING The device may be used by children of less than 8 years of age, people with
reduced physical, mental or sensory impairment, or generally anyone without experience
or, in any case, the required experience provided the device is used under surveillance or
that users have received proper training on safe use of the device and are aware of the
dangers related to its use.
WARNING Do not allow children to play with the device, the fi xed commands or the ra-
dio controls of the system.
WARNING Product use in abnormal conditions not foreseen by the manufacturer may
generate hazardous situations; meet the conditions indicated in these instructions.
WARNING DEA System reminds all users that the selection, positioning and installa-
tion of all materials and devices which make up the complete automation system, must
comply with the European Directives 2006/42/CE (Machinery Directive), 2014/53/UE
(RED Directive). In order to ensure a suitable level of safety, besides complying with local
regulations, it is advisable to comply also with the above mentioned Directives in all extra
European countries.
WARNING Under no circumstances use the device in an explosive atmosphere or in
areas that may be corrosive or could damage product parts. Check that the temperatures
at the installation site are suitable and comply with the temperatures declared on the
product label.
WARNING When working with the “dead man” switch, make sure that there are no pe-
ople in the area where the automatism is being used.
WARNING Check that there is a switch or an omni polar magneto-thermal circuit bre-
aker that enables complete disconnection in case of over voltage category III conditions
installed upstream from the power system.