Dea LIVI N Series, Инструкции по эксплуатации и предупреждения

Страница: 15 / 108

EN-3
2 PRODUCT DESCRIPTION
Models and contents of the package
The name LIVI/N identi fi es a series of electromechanical operators for sliding gates with different features as to motor and control
board power supply voltage, capacity, mechanical adjustment of force, electronic clutch and built-in limit switch. All automated models
involve the use of advanced control units (NET series) equipped with anti-crushing sensor, built-in 433 MHz radio receiver, speed control
and slow down in opening and closing. The LIVI/N models are intended primarily for residential / condominium and Semi-intensive/
intensive use depending on the duty cycle foreseen for the automation.
LIVI/N is completed by a set of accessories listed in the “PRODUCT ACCESSORIES” table (page I-7).
LIVI/N is composed of a mechanical gear motor which rotates the driving gear; This gear, coupled to the rack properly installed on
the gate, converts the circular motion of the gear motor into rectilinear motion thus allowing the movement of the gate on its own guide.
Inspect the “Contents of the Package” (Pic. 1) and compare it with your product for useful consultation during assembly.
Transport
LIVI/N is always delivered packed in boxes that provide adequate protection to the product, however, pay attention to all information
that may be provided on the same box for storage and handling.
3 TECHNICAL DATA
6N - 403N 9N - 803N 6/24N/F
6/24N/F-
BOOST
9/24N/F
Motor power supply voltage (V) 230 V ~ ±10% (50 Hz) 24 V
Absorbed power (W) 320 450 80 110
Max Thrust (N) 340 490 210 240 260
Work cycle (leaf L=5m) 18 cycles/hour 11 cycles/hour 22 cycles/hour 18 cycles/hour
Maximum n° of operations in 24 hour (leaf L=5m) 60 40 60 40
Built-in capacitor ( μ F) 8 12,5 -
Operating temperature range (°C) -20÷50 °C
Motor thermal protection (°C) 140 °C 160 °C -
Opening speed (m/min) 10 16 10
Weight of product with package (Kg) 11 12,5 12
Sound pressure emitted (dBA)
< 70
Protection degree IPX4
OPERATOR
CONTROL BOARD
NET24N
Power supply (V) 230 V ~ ±10% (50 Hz)
Rated power transformer (VA) 80 VA (230/22V)
Fuse F2 (A) (transformer) 1A
Batteries 2x 12V 1,3A
Fuse F1 (A) (batteries input) 15A
24V operators outputs 1x 5A
Warning: The above values are calculated by taking the maximum power
supplied by the respective processors. In absolute terms, the maximum
current for each output should not exceed 10A when using a single motor
and 7A when using 2 motors.
Auxiliaries power supply output 24 V
(2 24V_ST =
max 200mA )
Safety devices power supply output
“Warning” output 24 V max 15 W
Electric lock output
24V max 5W or max
1 art. 110
Flashing light output 24 V max 15W
Operating temperature range (°C) -20÷50 °C
Receiver frequency 433,92 MHz
Transmitters type of coding
HCS fi x-code - HCS rolling
code - Dip-switch
Max remote controllers managed 100
NET230N
Power supply (V) 230 V ~ ±10% (50 Hz)
Fuse F2 (A) 5A
Fuse F1 (A) 160mA
230V operators outputs 2x 500W (ou 1x 600W)
Auxiliaries power supply output 24 V ~
(2 24V_ST
= max 200mA )
Safety devices power supply output 24V
“Warning” output 230 V ~ max 150W
Electric lock output
max 1 art. 110 or 24V
output max 5W con fi gurable
230V Flashing light output 230 V ~ max 40W
24V Flashing light output
24 V max 100mA (for led
fl ashing light) art. LED24AI or
open gate warning light/courtesy
light
Operating temperature range (°C) -20÷50 °C
Receiver frequency 433,92 MHz
Transmitters type of coding
HCS fi x-code - HCS rolling code -
Dip-switch
Max remote controllers managed 100