Troubleshooting
Terminal/Telnet Interface
The Signon screen asks for a valid username and password.
Connected to etherpathx4.
Escape character is '^]'.
Enter name:
Enter password:
Pressing any key will then take you to the Main Menu, which also displays the version number
---- Welcome to the EtherPathX4 version v1_0 Setup Program ----
1 Set LAN properties
2 Set name/password
3 Set Serial port parameters
4 Set Advanced port parameters
5 Display Configuration
6 Reset Configuration to Defaults
7 Save and Exit
8 SNMP configuration
9 Exit without saving
Select a function by number ->:
Each of these menu options is explained in the following pages.
Entering Data
Enter the number of the field you wish to change, followed (on the same line) by a space and the data for
that field.
For example:
On screen one, to set the IP address (field 1) to 192.168.1.10
=> 1 192.168.1.10
Menu Options
Main Menu Option 1.
Setting LAN properties
Selecting 1 (
1. Set Local & Remote IP Address, Subnet Mask, Gateway Address
) from the Main
Menu will result in a screen which looks like the following.
19
IP Address: 205.166.54.188 Subnet Mask:
255.255.255.0
Gateway IP Address: TCP Tx Timeout: normal
SNMP enable: disable Web Setup Enable: enable
Web Server Port: 80 Telnet Setup Enable: enable
Telnet Setup Port: 8000
----------------------------------------
1 IP Address
2 Subnet Mask
3 Gateway IP Address
4 TCP Tx Timeout [0=normal, 1=slow]
5 SNMP enable [0=disable, 1=enable]
6 Web Setup Enable [0=disable, 1=enable]
7 Web Server Port
8 Telnet Setup Enable [0=disable, 1=enable]
9 Telnet Setup Port
0 --Return to previous menu.
Example: 4 1 ->:
