9
8
2.4
Tare operation
2.5
Counting and weighing operation
Make sure that the scale is in a stable state and put on heavy
objects. The weight must be less than the set allowable
peeling range, such as 2.500kg
Click [TARE] and remove the heavy object, which is displayed
as -2.500kg
Click [TARE] again to resume zero setting
Note:
1. If the placed weight exceeds the allowable zero setting range, the tare
operation will be performed after pressing the tare key.
2. The peeling range can be modified by SPEC 04 BIT 0 to select the
allowed peeling range of 50%FS or 100%FS
TARE
↑
(1) Ensure that the scale is in a stable state
(2) Press and hold the [REZERO] button for a long time, and
click the [ ← ] button three times to enter the customer
function settings
(3) Click the [REZERO] button to turn down to Spec03
(4) Modify the default "1011" to "1010"
(5) Click the [REZERO] button to save, press [ON/OFF] to exit
the setting
Method one
Enter weighing mode by setting button
REZERO
REZERO
TARE
↑
REZERO
ON
OFF
2. BASIC OPERATION
2. BASIC OPERATION
2.4
Tare operation
2.5 Counting and weighing operation
