23
22
*The default is 1001, the number of divisions allowed for overload display is 9d
*The default is 0000
*The default is 1111
*The default is 1111, which allows displaying the measured internal value
*The default is 0000, the battery voltage is displayed in the project clock for
measuring voltage
SPEC NO.14
SPEC NO.15
SPEC NO.16
SPEC NO.17
SPEC NO.18
0000: 0d
1000: 8d
0100: 4d
1100: 12d
0001: 1d
1001: 9d
0101: 5d
1101: 13d
0010: 2d
1010: 10d
0110: 6d
1110:14d
0011: 3d
1011: 11d
0111: 7d
1111:15d
【BIT 3/BIT 2/BIT 1/BIT 0】Allow overload to display the number of divisions
【BIT 3/BIT 2/BIT 1/BIT 0】Do not use
【BIT 3/BIT 2/BIT 1/BIT 0】Do not use
【BIT 3/BIT 2/BIT 1】Do not use
【BIT 3/BIT 2/BIT 1】Do not use
0: Allow
0: Display battery voltage
1: Forbid
1: Displays the percentage of
battery power remaining
【BIT 0】Display measured internal values
【BIT 0】Display items for measuring voltage
*The default is 0000
SPEC NO.19
【BIT 3/BIT 2/BIT 1/BIT 0】Do not use
Note:
1. Set the unused setting bits to "0"
2. FS is full weighing value
3. The system function is used to define the setting of measurement
specifications. The user cannot change it by himself, and it must be set by a
professional technician.
4.1
Full scale calibration
Modify BIT 3 of SPEC 12 to "0"
Click [REZERO] button to save
Click the switch below the scale body to open the calibration
Turn on the calibration switch again. Long press [REZERO],
click [ ← ] [ ↑ ] [ ↑ ] to enter the calibration, display the
maximum weight of calibration
REZERO
+
REZERO
UNIT
←
TARE
↑
TARE
↑
3. EDIT SETTINGS
3.5 System function definition
4.1 Full scale calibration
4. CALIBRATION OPERATION
*The default is 0101, the resolution is 3000d
1000: 6000d
1100: 15000d
1001: 7500d
1101: 20000d
1010: 10000d
OTHERS
1011: 12500d
Not used
SPEC NO.13
0000: 1000d
0100: 2500d
0001: 1250d
0101: 3000d
0010: 1500d
0110: 4000d
0011: 2000d
0111: 5000d
【BIT 3/BIT 2/BIT 1/BIT 0】Resolution selection
