13
12
2.6
Weight unit switch
2.7
Backlight brightness setting
Make sure the scale is stable
Make sure the scale is stable
Press and hold the [ ← ] key for 5 seconds, knowing that "bL.S
3" appears on the screen, and the displayed "3" is the backlight
brightness level
Click [ ← ] to increase the brightness, the minimum brightness is 0
(without backlight), and the maximum brightness is 9
Click [REZERO] to save and exit
Put a heavy object on the weighing pan, such as 0.545kg
Click the [ ← ] key, it is displayed as 1.202lb; click the [ ← ] key
again, it is displayed as 19.22oz; the third click the [ ← ] key, it
is displayed as 545g; the fourth time it is restored to 0.545kg
After removing the heavy objects, click [REZERO] to resume zero setting
REZERO
Note:
To enable this switching function, SPEC03 bit.2 must be set to 0
Note:
When working with batteries, reduce the brightness level of the
backlight as much as possible. To reduce battery consumption and
extend battery life
UNIT
←
UNIT
←
2. BASIC OPERATION
2. BASIC OPERATION
2.6
Weight unit switch
REZERO
2.5 Backlight brightness setting