DAYGAS Radium 15, Руководство пользователя и гарантия

Страница: 18 / 34

Radium I Type
Assembly Steps
Step 1 - Mounting the Suspension Braces
The pendant suspension materials to be used in the assembly of the suspension
apparatus should be selected from materials that are resistant to heat and
elongation resistance and can carry a minimum of 30 kg in CE standards. Each of
these materials should be attached to the place where the assembly will be made
with fasteners with a minimum 30 kg carrying capacity.
It should be hung flat on the scale, leaving a gap of 280 cm between the lower
hanger apparatus. The lengths of all the stalactites must be in the same proportion
and straight. The space between the device and the ceiling should be at least 25-30
cm from the top of the device.
The gap from the floor to the device is at least 2.5 m. The space from the floor to the
device may vary according to the rates approved by the regional gas distribution
companies.
18
DEVICE
FLOOR
2,5 m
DEVICE
CEILING
25-30 cm
Reflector Pressure Spring (Supplied with the device)
www.daygas.eu
280 cm