DAYGAS Radium 15, Руководство пользователя и гарантия

Страница: 15 / 34

Step 3 - Attaching the Hangers
Make sure that the upper hanger brackets are fully seated on the surface of the pipe.
Make sure that the compression of the radiant pipes is correct and
solid after the upper suspension apparatus has been assembled
with the lower suspension apparatus.
Step 4 - U Elbow Connection
Make sure that the elbow is in full contact with the radiant pipes in the
U elbow assembly. Be sure and provide the connection with
stainless couplings.After tightening, make sure to check
that the compression is correct and firm.
If necessary, fix the burner
with an additional fixing
material as shown in the
figure.
Step 5 - Burner Assembly
Make sure that the burner pipe is in full contact with the radiant pipe
and fix it with a stainless coupling. without fixing
then make sure the burner is level and level.
Check its health.
15
www.daygas.eu
Radium U Type
Assembly Steps