Datavideo SE-1200MU, Инструкция по эксплуатации

Страница: 28 / 60

28
Each wipe pattern consists of blue and white colours. The white represents the current Program image (A)
and the blue represents the WIPE-IN image (B). There are a total of 32 WIPE presets offered by the SE-
1200 MU as shown below.
6.3.3.2 Wipe border options
Options in the yellow menu column
Wipe
allows a wipe pattern to be selected by
clicking on the required wipe pattern in the
selection pane.
Wipe Border
allows the user to choose the colour
of the border from a palette window.
Wipe Shade allows the user to choose the
shadow colour of the border from a palette or
assign a video source .
Wipe Position allows the user to adjust the centre
position of some wipes (e.g Circle & Elipse).
Options in the lower blue row
Wipe
allows a wipe pattern to be selected by
entering the required wipe number.
Soft allows the user to blend the leading and
trailing limits of the border to remove the hard
edge. A low value results in a solid edge border
and a high value gives a soft diffused border.
Wipe Border switches the border effect on or off.
Width changes the size of the border effect. A low
value results in a thin border and a high value
gives a wide border.
Level sets how far the wipe has travelled or where
it is displayed in the video area.
6.3.4 Clip between Sources (Stinger Transition)
In order to enable clip transition between two video sources
first ensure the Background Transition or
Bgnd
button is ON /
backlit green in the transition controls area of the user
interface.