Datavideo SE-1200MU, Инструкция по эксплуатации

Страница: 21 / 60

21
Chapter 5 Video Connection Setup
5.1 Inputs – Setup
5.1.1 Crosspoint
The physical input sources can be swapped
around within the SE-1200 MU by using the
cross
point section of the Inputs menu .
Click a crosspoint (lower row) then click again on
the required input (upper row) to link them. The
example above shows inputs 2 and 3 swapped.
5.1.2 Source Labels
The multi view source labels can be changed. First click Inputs menu then choose the input you wish to
name . Then use the pop up keyboard to edit the selected input name. Press Enter to store the change, the
new Multi view label should now be displayed.
Note:
The label will accept up to 16 characters but only the first 10 are displayed.
A Freeze option is provided for use when you wish to grab and save a still image from a selected input, see
Stills – Grab and Save section .
A
ProcAmp option
is provided for adjustment of an input’s white, black or chroma level. It may be easier or
better to adjust an incoming image at the source equipment, please seek advice before changing these
settings.
5.2 Setting up the SE-1200 MU Video Stream Based Multi View
The SE-1200 MU is able to send, or stream, its multi view image over the same IP network connection used
for controlling the switcher. This allows the user to see the multi view on the same computer that is
remotely controlling the switcher.