Datavideo iCast 10NDI, Инструкция по эксплуатации

Страница: 23 / 96

23
Main Menu Level 1 Level 2 Level 3
Line In
XLR
Audio Setting
Record & Stream
Setting Status Main Record
Sub Record
Main Streaming
Sub Streaming
Channel 5 Video Source HDMI
IP Stream
NDI
Audio Source Embed
Line In
XLR
Audio Setting
Record & Stream
Setting Status Main Record
Sub Record
Main Streaming
Sub Streaming
Program Audio Source Embed
Line In
XLR
Audio Setting
Record & Stream
Setting Status Main Record
Sub Record
Main Streaming
Sub Streaming
4.1 System
In System, you will be allowed to configure the device’s network settings, view the device’s firmware
version and reset the device to its factory defaults.
Network Settings
The iCast 10NDI can be accessed over an existing TCP/IP LAN type network. In Network Settings, you
will be allowed to gain direct access to the DHCP and Static IP modes.
Enabling DHCP allows the iCast 10NDI to be automatically assigned an IP address upon connection to
the DHCP network. If DHCP is disabled, you will have to manually enter the network settings such as
the static IP address, subnet mask, default gateway (optional), primary DNS (optional) and secondary
DNS (optional).
Detailed network setup instructions can be found in Section 5.1 Network Connection and Device
Search .
FW & FPGA Version
In this option, you will be able to view the firmware version as well as the FPGA version on the 2”
LCD screen as shown below. The firmware upgrade procedure can be found in
Appendix 2 or Section
5.10 System .