Datavideo iCast 10NDI, Инструкция по эксплуатации

Страница: 14 / 96

14
that up to three input channels can be simultaneously set
to the NDI or IP stream video source type. For example, if
channels 1, 2 and 3 are assigned of NDI or IP stream video
sources, you can only set channel 4 to other video source
types (channel 5 is designed solely for UVC input).
For output stream setup, see Section 5.5 or Chapter 6 .
7. WAN Port
The WAN port is basically another alternative to the LAN
port. The two network ports have the same functionalities
but the LAN port has priority over the WAN when they are
in use at the same time.
8. SDI Loop OUT
The Loop OUT port allows you to deliver the video source
connected to the SDI IN port to the connected SDI
destination device such as an SDI monitor.
9. Program OUT
The program OUT port allows you to connect an HDMI
monitor for displaying the program video which can be
selected using the channel buttons on the front panel.
10. Multiview OUT
The Multiview OUT port allows you to connect an HDMI
monitor for displaying a Multiview of input video
channels. The iCast 10NDI offers four different Multiview
layouts, see
Section 5.7 PGM for more information about
selecting and setting these layouts.
11. RCA Unbalanced Audio Input
Connects an unbalanced analog audio source (stereo).
12. XLR Balanced Audio Input
Two XLR Balanced Audio Input channels.
13. RS-232 Port
Connect to the RS-232 port for remote control.