Datavideo iCast 10NDI, Инструкция по эксплуатации

Страница: 24 / 96

24
FW & FPGA Version
FW Version 0.1.4.6
FPGA Version 21.11.3.0
Tap [Left] to Back
Factory Default
After you’ve selected “Factory Default”, you will see the following message prompt on the 2” LCD
screen. Simply push the knob to start the reset or tap the knob left to cancel.
Are you sure you would like to reset
all settings to defaults?
(This action cannot be undone.)
4.2 Storage Settings
If you need to format the inserted hard disk, you can quickly do it from the OSD menu. You can also
view the disk capacity which is displayed in MB.
Format Type
In Format Type, select FAT 32, NTFS or exFAT. Please note that formatting the disk will delete all the
files.
Storage Capacity
The hard disk capacity will be displayed as shown below.
Storage Capacity
0000
MB Remaining
Tap [Left] to Back
4.3 Program CG
The iCast 10NDI allows you to place multiple textual or graphic layer on top of the video. In Program
CG, You can enable/disable these CG layers listed as follows:

Text: textual layer

Graphic: still graphic layer

Logo: still logo layer

Animation: animated graphic layer
See Section 5.6 CG for configuring these CG layers using the Web UI.