19
3.3
Connecting Output Devices
The iCast 10NDI has three video outputs, namely SDI Loop OUT, Program OUT, and Multiview OUT. It
is possible to operate the iCast 10NDI with just one or multiple monitors connected as shown in the
diagram below.
The SDI Loop OUT displays the SDI input video. The Datavideo TLM-170L/V/K/F monitors could be
used. The Program OUT displays the channel video (Channels 1 – 5) selected on the front panel of
the iCast 10NDI. The Program OUT can also be set to other viewing modes such as quad view, POP,
PIP and side by side; see
and
The Multiview OUT displays a combination of four channel videos. You can press the corresponding
buttons on the front panel to select either a 2x2 or 4x1 multiview layout. See
in this chapter for details.
3.4
Network Connections
With the LAN port, the iCast 10NDI can directly communicate with a PC/notebook using a static IP
address. The two devices can also communicate across a DHCP network. Please seek the help of an
IT specialist for network setup if necessary.
Once the network connection is set up, you will then be able to open the web UI on the
PC/notebook and configure and operate the iCast 10NDI accordingly. See
setup instructions and descriptions of the Web User Interface.
Содержание iCast 10NDI
