Dataprobe 1530041, Руководство пользователя

Страница: 52 / 72

iBoot-PDU_v170515e iBoot-PDU User Manual Page 52
Each type of sequence action has a set of parameters. The following table details the nature of the parameters 1-8 for each action:
Action Type Param1 Param2 Param3 Param4
– Param8
Outlet Device ID or Remote Name
local and remotes Outlet Number
Action
"ON", "OFF", "CYCLE"
Group Group ID or NAME
local groups only Action
"ON", "OFF", "CYCLE"
Delay Number of Seconds
Sequence Device ID or NAME
local and remotes Sequence ID or NAME
(Not "SAME" sequence) Action
"RUN", "STOP"
Email Destination Email
Address Subject Line:
80 Char String Body Line 1:
80 Char String
Additional 80 Character
Strings for Body of Email
Log
Header Text
Ascii string 30 char Log Text
80 Char Message
Loop Target Action Number Loop Count
Integer 1-100
set sequence <name> action <1-n> param1 <value>
set sequence <name> action <1-n> param2 <value>
set sequence <name> action <1-n> param3 <value>
set sequence <name> action <1-n> param4 <value>
set sequence <name> action <1-n> param5 <value>
set sequence <name> action <1-n> param6 <value>
set sequence <name> action <1-n> param7 <value>
set sequence <name> action <1-n> param8 <value>