iBoot-PDU_v170515e
iBoot-PDU User Manual
Page 19
5.6.
Sequences
Sequences are a set of actions that can be initiated with a single command. Sequences can contain outlet,
group and messaging actions. Sequences can also include delays and looping to build sophisticated sets of
instructions.
Add Sequences
5.6.1.
Click on Add Sequence to begin the setup process.
Enter the name of the sequence than click Save.
The status of the sequence is displayed on the top right of the card. Statuses are:
Disabled
The sequence is disabled for editing or to prevent execution
Stopped
The sequence is enabled, but execution has been halted A Run button will be presented to
initiate the sequence
Running
The sequence is currently running. A Stop button will be presented to halt the sequence.
Enable Checkbox determines if the sequence is available to be executed
Show on Dashboard determines if the sequence card will be displayed on the Dashboard
Click on the + sign to expand the sequence and build the steps of the sequence.
Click Add Step and select the step to be added. Available steps are
Delay
Wait before proceeding to the next step
Select the length of time in seconds
Outlet
Control an outlet
Select the device (if remotes are present
