iBoot-PDU_v170515e
iBoot-PDU User Manual
Page 13
Device Cards:
5.2.1.
This card represents the iBoot-PDU outlets, Mains and any temperature sensors that are connected to it. If
additional remote units are associated with this iBoot-PDU, they will be represented by their own Device Cards.
The device card shows each outlet current status of each outlet
Outlet OFF
Outlet OFF transitioning to ON
Outlet ON
Outlet ON transitioning to OFF
Outlet Not available to the user
The voltage and current are displayed on each device card in the upper right hand corner. PDUs with dual
inputs will display the voltage and current for each input in their respective 4 outlet segments
If the optional temperature sensor is installed, the temperature of one or both of the probes of the sensor in the
lower right hand corner. See Section 10.1
Selecting and Controlling Outlets
5.2.2.
Click on any outlet to select it. The outlet is highlighted when selected. More than one outlet can be selected
before power operations are commanded.
Make sure only the desired outlets are selected prior to making any power control operation.
Outlets can also be selected by using the ALL/NONE icon located in the upper left hand corner of the Device
Card. There are also ALL/NONE icons for outlets 1-4 and 5-8.
Once one or more outlets are selected, the control buttons are available. Select On, Off or Cycle as desired to
begin the power control sequence for one or more outlets.
If multiple outlets are selected and the On button is pressed, there will be a delay between each outlet. This
delay is user programmable. See Section 7.3. Off actions are simultaneous for all outlets selected.
If the same multiple outlets are repeatedly controlled together, it may be advantageous to create a Group of
outlets and control them using the group capabilities. See Section 0
