iBoot-PDU_v170515e
iBoot-PDU User Manual
Page 27
Schedule Fields
6.4.2.
Name
Enter a Name for the trigger. Up to 20 Alphanumeric characters, no spaces
Start Date
Set the date of the first occurrence. A drop down calendar assists entry
Start Time
Enter the Start Time (HH:MM) in 24 hour format. A drop-down assist entry.
Repeat
Set whether the event will repeat. Set None, Daily, Weekly, Monthly
Select the days of the week using the checkboxes to set which days of the week
the trigger is to occur.
Outlet
Select which outlet the trigger is to act on. All outlets is also an option. To run
pre-programmed sequences, click on Use Advanced.
Action
Set the action on the single outlet, or all outlets:
ON
Turn the outlet On
OFF
Turn the outlet Off
Cycle
Cycle the outlet for the programmed length of time.
Cycle can be in either direction (On-OFF-ON or Off-On-
Off depending on the current state of the outlet. For a
more determinate cycle, use a sequence with two or
more steps
Advanced Settings
The Advanced Settings allows a sequence to be defined. Select one of the
previously defined sequences from the drop down list.
Enable
Check Enable to make the schedule active. The schedule must be disabled to
make any edits.
Save
Click Save to complete the setup process.
