Datalogic Ulyxe PL, Руководство пользователя

Страница: 14 / 68

Ulyxe PL
TM
14
1
1.6 FIXING AND POSITIONING
The marking system need to be positioned in safety mode and fixed on an appropriate plan absolutely with
no vibrations.
Ulyxe PL
TM
is equipped with 4 threaded
holes and 2 fixing pins.
Screws M6
Fixing pins Ø5 H7
Figure 4: Fixing points.
Figure 5: Measures, distance threaded holes and fixing pins drivers.
WARNING!
It is very important to secure the marking system before you start marking the piece since improper
securing or positioning may cause serious damage. Do not secure the marking system in a way
other than the one described in the figure.
NOTE:
In order to prevent marking distortions, check for the absence of vibrations between marking system
and piece to be marked.
NOTE:
It is recommended to install the marking system on a micrometer positioning Z-axis system!