Datalogic Ulyxe PL, Руководство пользователя

Страница: 45 / 68

ACCESSORIES
45
5
menu s ele
STAN D BY
SERVI C
ho
mor e
Selection menu to display general SERVICE.
•
Press the middle area to select it and display the information.
•
Press the bottom left arrow to return to the main screen with the
REMOTE CAN LCD logo.
•
Press the bottom right arrow to access the next selection menu.
SY
menu s ele
STAN D BY
ho
mor e
Selection menu to display SYSTEM MONITOR.
•
Press the middle area to select it and display the data.
•
Press the bottom left arrow to return to the main screen with the
REMOTE CAN LCD logo.
•
Press the bottom right arrow to access the next selection menu.
LAS
menu s el
STAN D BY
ho
mor e
Selection menu to display LASER MONITOR.
•
Press the middle area to select it and display the data.
•
Press the bottom left arrow to return to the main screen with the
REMOTE CAN LCD logo.
•
Press the bottom right arrow to access the next selection menu.
SETU P
menu s e
ho mor e
STAN D BY
Selection menu to display the SETUP.
•
Press the middle area to select it and display the settings.
•
Press the bottom left arrow to return to the main screen with the
REMOTE CAN LCD logo.
•
Press the bottom right arrow to access the next selection menu.
Lc
Te
La
STAN D BY
Data contained in the SERVICE menu.
•
LcdFW: FW version of the LCD card.
•
TecFW: FW version of the power mainboard.
•
Language: language is set on English.
•
Press the bottom left arrow to return to the main screen with the
REMOTE CAN LCD logo.
B
In
H
STAN D BY
S
Information contained in the SYSTEM MONITOR menu (1 of 2).
•
Board Temp. [°C]: Temperature of the mainboard for the power
section.
•
Input Voltage [V]: Input power voltage measured on the mainboard.
•
Heatsink T. [°C]: Central heatsink temperature.
•
System Temp. [°C]: Environment temperature measured inside the
system (at the cooling fans inlet).
•
Press the bottom left arrow to return to the main screen with the
REMOTE CAN LCD logo.
•
Press the bottom right arrow to access the following information.
T
TE
S
H
STAN D BY
Information contained in the SYSTEM MONITOR menu (2 of 2).
•
Serial: System serial number, visible on the outside label too.
•
Hr System: Total time elapsed with system in operation [hhhh:mm:ss]
•
TEC voltage [V]: Voltage on the Peltier module
•
TEC Current [A: Current on the Peltier module
•
Press the bottom left arrow to return to the main screen with the
REMOTE CAN LCD logo.