Datalogic DS8110, Справочное руководство

Страница: 270 / 282

DS8110 REFERENCE MANUAL
258
7
Error
Code Description Severity Explanation Symptom Troubleshooting Action required
182 Ethernet
Socket 5
Error Error Protocol Index
message not
received on User
Socket 5.
183 Ethernet
Socket 6
Error Error Protocol Index
message not
received on User
Socket 6.
191 Fieldbus
Mismatch Error Fieldbus module
type does not
match specified
model.
- Module selection
incorrect
compared to the
actual module
installed.
193 Fieldbus
Config Error Error Error configuring
fieldbus module. - Unable to
communicate
to the module.
- Confirm that the
unit is not
communicating
to the host.
- Confirm that the
fieldbus
parameters are
configured
properly
(see
section 4.5.8) .
- Replace fieldbus
module.
195 Fieldbus
DHCP Error Error Profinet module
had a DHCP error. - Unable to
acquire an IP
address.
- Confirm that the
unit is not
communicating
to the host.
- Confirm that
the fieldbus
parameters are
configured
properly
(see
section 4.5.8) .
- Replace fieldbus
module.
205 APD
Temperature
Error Error APD Temperature
sensor is not
working. A
fluctuation in the
scanner's
temperature can
have an adverse
effect on several
internal functions
of the scanner. The
scanner monitors
the temperature,
and if it is erratic,
this error is posted.
- The scanner
may experience
an increase in
no-reads.
- The scanner
may start
missing the
transmit point.
1. Cycle power on
the scanner;
2. Wait until the
unit has time to
cool down.
3. Restart the
scanner and
monitor it to
determine
whether the
error reoccurs.
This is an internal
failure and is not
field serviceable.
- Replace scanner.