Datalogic DS8110, Справочное руководство

Страница: 259 / 282

MAINTENANCE
247
6
6.2 MAINTENANCE TASKS
Perform the maintenance tasks on an “as needed” basis to assure proper operation of the
barcode scanner. Task schedule frequency depends upon the application environment
conditions. It only requires a few minutes to complete each maintenance task.
Exterior Cleaning
WARNING: Shut down the scanner before performing this maintenance
task. Do not stare into the scanner’s exit window at the laser light. Avoid
direct eye exposure. The laser light level does not constitute a health
hazard, however staring at the laser light for prolonged periods could
result in eye damage.
CAUTION: Do not use any chemical on the scanner that is unsafe for
plastics, such as benzene, acetone, or similar products. Before performing
this maintenance task, be sure to shutdown the unit.
The exterior cleaning procedure may be performed without removing the reader from the
mounting structure.
1. Turn off the barcode scanner by disconnecting the power source.
2. Clean the exterior (except the exit window) with a clean, soft-bristle brush. Be sure
not to brush any dust, dirt, or debris onto the exit window.
3. Carefully remove any debris in or around the exit window.
4. Wipe the exterior (except the exit window) with a clean, soft cloth dampened slightly
with a mild detergent solution.
5. The exit window should be cleaned after this task is completed.