Datalogic DS5100, Справочное руководство

Страница: 18 / 164

DS5100 REFERENCE MANUAL
2
1
CBX100/500 Pinout for DS5100
The table below gives the pinout of the CBX100/500 terminal block connectors. Use this
pinout when the DS5100 reader is connected by means of the CBX100/500:
CBX100/500 Terminal Block Connectors
Input Power Outputs
Vdc Power Supply Input V +V Power Source - Outputs
GND Power Supply Input Voltage - -V Power Reference - Outputs
Earth Protection Earth Ground O1+ Output 1 +
O1- Output 1 -
Inputs O2+ Output 2 +
+V Power Source
– External Trigger
O2- Output 2 -
I1A External Trigger A
(polarity insensitive)
Auxiliary Interface
I1B External Trigger B
(polarity insensitive)
TX Auxiliary Interface TX
-V Power Reference
– External Trigger
RX Auxiliary Interface RX
+V Power Source
– Inputs
SGND Auxiliary Interface Reference
I2A Input 2 A
(polarity insensitive)
ID-NET
I2B Input 2 B
(polarity insensitive)
REF Network Reference
-V Power Reference
– Inputs
ID+ ID-NET n
Shield ID- ID-NET network -
Shield Network Cable Shield
Main Interface
RS232 RS485 Full-Duplex
TX TX+
RTS TX-
RX * RX+
CTS * RX-
SGND SGND
* Do not leave floating, see par. 4.2.2 for connection details.
CAUTION:
Do not connect GND, SGND and REF to different (external)
ground references. GND, SGND and REF are internally connected through
filtering circuitry which can be permanently damaged if subjected to voltage
drops over 0.8 Vdc.