Datakom DPR-350 Series, Руководство пользователя

Страница: 47 / 72

DPR-350 User Manual Ver_01 Firmware V-1.0
K91D01-EN - 48 -
Parameter Definition Unit Min Max Factory
Setting
Description
Language Selection - 0 1 0
0: English
1: Turkish. This option can vary
according to the country of use.
Different languages can be uploaded
using Rainbow Plus software.
Intermittent Relay Timer Sec 0 255 1
If Intermittent Relay Active parameter is
set to 1, the horn relay engages and
disengages intermittently for the
duration of this timer.
Horn Timer Sec 0 120 60
If a warning or an alarm occurs, the
HORN output is energized for the
duration of this timer. If this timer is set
to 0, the horn output is energized
indefinitely.
Periodic Record Timer Min 0 65000 60 Sets the periodic event record timer
RS-485 Enable - 0 1 1
0: RS-485 port disabled
1: RS-485 port enabled
Modbus Address - 0 254 1
This parameter is the Modbus address
of the device.
RS-485 Communication
Rate
Baud 2400 115200 9600
RS-485 Modbus port communication
rate
Intermittent Relay Active - 0 1 0
0: continuous
1: intermittent
Alarm Event Record - 0 1 1 0: Disabled 1: Enabled
Warning Event Record - 0 1 1 0: Disabled 1: Enabled
Digital Input 1 Event
Record
- 0 1 1
0: Disabled 1: Enabled
Digital Input 2 Event
Record
- 0 1 1
0: Disabled 1: Enabled
Digital Input 3 Event
Record
- 0 1 1
0: Disabled 1: Enabled
Digital Input 4 Event
Record
- 0 1 1
0: Disabled 1: Enabled
Programming Event
Record
- 0 1 1
0: Disabled 1: Enabled
Reset Event Record - 0 1 0 0: Disabled 1: Enabled
Output Event Record - 0 1 1 0: Disabled 1: Enabled
Periodic Event Record - 0 1 0 0: Disabled 1: Enabled
LCD Backlight Timer Min 0 1440 0
If no buttons are pressed in this
duration, the LCD backlight turns off.
Flashing Relay ACTIVE
Timer
Min 0 6000 0
Flashing relay ACTIVE timer.
Flashing Relay PASSIVE
Timer
Min 0 6000 0
Flashing relay PASSIVE timer.
Internal Record Period Sec 2 65000 60
Configures the frequency of records in
the internal memory. More frequent
records will cause the memory to fill
quickly. Once memory is full, the oldest
record will be deleted.
Modbus Packet Type 0 1 0
Do not change this parameter. Affects
the Modbus map structure.
20. PROGRAM PARAMETER LIST
20.1. CONTROLLER CONFIGURATION GROUP