Datakom DPR-350 Series, Руководство пользователя

Страница: 43 / 72

DPR-350 User Manual Ver_01 Firmware V-1.0
K91D01-EN - 44 -
If any of the analog values of the measured parameters are outside the configured limits cause an
ALARM situation.
In case of a fault condition, the alarm pop-up screen is displayed and the alarm function is activated.
Alarm status can be assigned to a relay output in order to control various systems.
There are low/high levels and timers for every alarm. If the fault condition is removed before the programmed
timer expires, no alarm is raised.
Alarms can be configured as latching. For a latching alarm, the alarm will be displayed even if the fault
condition is removed.
Alarm levels can be configured for many alarms. Refer to programming section for alarm level configuration.
Active protections can be viewed in the protections screen given below. In case of a fault, the relevant
protection bar will start to fill. The alarm will be raised when the bar is completely full.
Protections Screen
18. PROTECTIONS & ALARMS
If a fault condition occurs, the alarm pop-up screen will be
displayed automatically.