Datakom DKM-409 PRO AT Скачать руководство пользователя страница 65

Страница: 65 / 66

DKM-409 Pro AT User Manual Rev_02 Firmware V-2.5

K91D01-EN - 65 -

The unit conforms to the EU directives

-2006/95/EC (low voltage)

-2004/108/EC (electro-magnetic compatibility)

Norms of reference:

EN 61010 (safety requirements)

EN 61326 (EMC requirements)

The CE mark indicates that this product complies with the European requirements for safety, health

environmental and customer protection.

UL / CSA Conformity:

UL 61010-1, 3rd Edition, 2012-05,
CAN/CSA-C22.2
File: E475547, Vol. D1

Wipe the unit, if necessary with a soft damp cloth. Do not use chemical agents

Following

DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

of 27 January 2003 on waste electrical and electronic equipment (WEEE)

, this unit should be stored and

disposed separately from the usual waste.

The european ROHS directive restricts and prohibits the use of some chemical materials in electronic
devices.

Following the “

DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8

June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic
equipment”,

this product is listed in annex-

I under category: “

Monitoring and control instruments

including industrial monitoring and control instruments

” and exempted from ROHS directive.

However Datakom is not using any ROHS uncompliant electronic components in the production. Only the
solder contains lead. The switching to unleaded soldering is in progress.

22. DECLARATION OF CONFORMITY

23. MAINTENANCE

DO NOT OPEN THE UNIT !

There are NO serviceable parts inside the unit.

24. DISPOSAL OF THE UNIT

25. ROHS COMPLIANCE

Содержание DKM-409 PRO AT



































































Результаты поиска

Содержание DKM-409 PRO AT

Отзывы:

Datakom DKM-409 PRO AT, Руководство пользователя, Страница: 65 / 66

Результаты поиска

Содержание DKM-409 PRO AT

Отзывы: