Datakom DKM-409 PRO AT Скачать руководство пользователя страница 30

Страница: 30 / 66

DKM-409 Pro AT User Manual Rev_02 Firmware V-2.5

The unit performs a detailed set of AC measurements. Displaying these parameters are organized under
PARAMETER GROUPS and subgroups.

Switching between parameter groups are made with

button.

Each depression of the

button switches the screen to the next parameter group. After the last

group, the first group is displayed again.

Switching within the same group is performed with

and

buttons.

Each depression of the

button switches the screen to the next display in the same group. After the

last display, the first display comes again.

Each depression of the

button switches the screen to the previous display in the same group. After

the first display, the last display comes again.

The list of

parameter groups

are below:

Measurement Screens:

Voltage, current, kW, kVA, kVAr, pf, active and reactive energy counters.

Demand Screen:

Demand current, demand power; minimum, maximum of current, voltages, reactive

and capacitive powers.

Status Group:

Various information as date-time, firmware version, identity, configuration, etc...

User Screens:

Screens in this group are configured by the user.

Oscilloscope Screens:

In this group, waveforms of currents and voltages may be visualized as an

oscilloscope. All phase-neutral and phase-phase voltages and each current input are available. Thanks to
this feature, waveform distortions and harmonic components are displayed in graphical form.

Harmonic Analysis Result Tables:

In this group, THDs of currents and voltages are displayed with

0.1% precision. All phase-neutral and phase-phase voltages and each current input are available.

9.1. SCREEN SCROLLING

Содержание DKM-409 PRO AT



































































Результаты поиска

Содержание DKM-409 PRO AT

Отзывы:

Datakom DKM-409 PRO AT, Руководство пользователя, Страница: 30 / 66

Результаты поиска

Содержание DKM-409 PRO AT

Отзывы: