Datakom DK-70, Руководство пользователя

Страница: 79 / 121

- 79 -
Date-time information is received from the built-in, battery-powered real time clock.
Parameter Definition Unit Min Max Description
Day - 01 31 Day of the month
Month - 01 12 Month information
Year - 00 99 Last two digits of the year
Hour - 00 23 Hour of the day
Minute - 00 59 Minute of the hour
Second - 00 59 Second of the minute
In some applications, it is required that the compressor activates only during working hours. The weekly
operation schedule allows for this kind of application.
Using the weekly schedule, the unit can be configured to turn on or off automatically in hourly sections.
The weekly operation schedule has 7 days x 24 hours = 144 parameters. The device can be configured
to switch to RUN mode or STOP mode for each hour of the week.
In order for the compressor to follow the weekly operation schedule and start/stop automatically, the
Weekly Operation Schedule Enabled parameter in the Controller Configuration Group must be set to 1.
If the Weekly Operation Schedule Enabled parameter is set to 1, the compressor will start and stop as
configured in the weekly operation schedule. When the compressor stops while this feature is active,
“
STOP-Weekly Schedule
” warning occurs; when the compressor starts automatically, “
RUN-Weekly
Schedule
” warning is displayed.
If the STOP button is pressed while the compressor is running according to weekly schedule, or if the
START button is pressed while the compressor is stopped according to weekly schedule,
“
Weekly
Schedule Cancelled
” warning is displayed and the
Weekly Operation Schedule Enabled parameter is
automatically set to 0. If the compressor is required to operate according to the weekly schedule, the
Weekly Operation Schedule Enabled parameter must be set to 1 again.
15.5. WEEKLY OPERATION SCHEDULE
15.4. ADJUST DATE AND TIME