Datacolor 9020-0129 Скачать руководство пользователя

Страница: 105 / 127

Datacolor CONDITIONER™ (MB2) 06/2017

page 105/126

16.2 Setting the parameters

This menu allows setting the storage interval, the type of values to be shown and the scaling of the tem-
perature and humidity charts.

Path:

Main menu > Settings > Measurement chart

“Measurement chart” submenu.

•

Select the field “Storage interval” and enter the desired storage interval. Confirm entry with

Confirm

icon.

The available presentation depends on the pre-selected storage rate. Factory setting: 60 seconds.
This means the higher the storage rate, the more precisely but shorter the data representation will be.

•

In the field “Storage values” select the desired

value type to be displayed.

•

For scaling the representation select the desired minimum and maximum temperature or humidity

value and enter the desired value. Temperature display range: -20 °C up to 110 °C. Humidity display
range: 0% r.H. up to 100% r.H. Confirm entry with

Confirm

icon.

CAUTION

Setting the storage rate or rescaling (minimum and/or maximum) will clear the
measured-value memory and the event list.

Danger of information loss.



Change the storage rate or scaling ONLY if the previously registered data is no longer

needed.

After completing the settings, press the

Confirm

icon to take over the entries and exit the menu,

press

the

Close

icon to exit the menu without taking over the entries.

Содержание 9020-0129
































































































































Результаты поиска

Содержание 9020-0129

Отзывы:

Похожие инструкции для 9020-0129

Бренды по названию

Популярные бренды

Datacolor 9020-0129, Руководство по эксплуатации

Результаты поиска

Содержание 9020-0129

Отзывы:

Похожие инструкции для 9020-0129

Бренды по названию

Популярные бренды