DataCard SD260, Инструкция по установке и эксплуатации

Страница: 91 / 216

81
112: Card hopper empty
The printer does not detect cards in the input hopper.
1.
Open the input hopper.
2.
Insert cards in the input hopper. Cards can stick
together: Slide or fan cards to separate the edges
before loading the input hopper.
3.
Close the input hopper and resume printing.
HINTS & TIPS
•
Orient all cards the same way.
•
Do not touch the card surface to be printed:
•
Handle cards by their edges
•
Wear gloves
113: Close cover to continue
The printer cover must be closed to print.
1.
Close the cover.
2.
Push down on the cover to latch it.
HINTS & TIPS
•
Make sure the ribbon cartridge is installed.
•
Make sure the cartridge handle is even with the
edges of the printer.
114: Cover opened during job
The printer cover must be closed to print.
1.
Close the cover.
2.
Push down on the corners of the cover to latch it.
HINTS & TIPS
•
Make sure the ribbon cartridge is installed and the
handle is even with the edges of the printer.
•
The card, if it started to print, should be discarded.