DataCard SD260, Инструкция по установке и эксплуатации

Страница: 196 / 216

186 How-To Topics
Set Magnetic Stripe Coercivity
The printer setting for coercivity can be changed from the LCD panel, if needed.
Usually, coercivity is a system-wide decision and does not change.
1.
Begin with the printer “Ready”. The U
SER
button
shows steady green.
2.
Press the U
SER
button to display “Suspended” on
Line 1 of the LCD panel.
3.
Press the E
NTER
key to enter the menu system.
4.
Press the down arrow key to scroll to the
Configuration menu.
5.
Press the E
NTER
key to enter the Configuration menu.
6.
Press the down arrow key to display “Magstripe” on
Line 2.
7.
Press the E
NTER
key to enter the menu. “Coercivity”
is displayed on line 2.
8.
Press the E
NTER
key to enter the Coercivity menu.
“Coercivity” is displayed on line 1 and the current
setting is displayed on line 2.
9.
Press an Arrow to display the intended coercivity.
10.
Press the E
NTER
key. “Apply” is displayed on line 2.
11.
Press the E
NTER
key to save the value. “Exit” is
displayed on Line 2.
12.
Press E
NTER
repeatedly to exit the menu system. The
LCD panel displays “Ready” and the U
SER
button
glows steady green.