![background image](http://html1.mh-extra.com/html/datacard/sd260/sd260_installation-and-user-manual_3663130075.webp)
65
Chapter 4: Printing Cards
This section explains how to:
•
Print a card to a printer with an input hopper. See
“Printing Cards: Printer
with Input Hopper”
for details.
•
Print a card to a printer with a single feed slot. See
“Printing Cards: Printer
with Single Feed Slot”
for details.
•
Print on both sides of a card. See
“Print on Both Sides of the Card”
for
details.
•
Print a sample card.
“Print Driver Sample Cards”
for details.
Make sure:
•
The printer system is set up. See
“Printer System”
for details.
•
The card design is set up. See
“Card Design and Setup”
if you need to set up
the design.
•
Ribbon is loaded in the printer. See
“Load Ribbon”
for the steps to follow.
H
INTS
& T
IPS
Make sure magnetic stripe cards are inserted correctly. The printer shows the
correct position.
You can also print a test card from the printer. See
“Print a Printer Test Card”.
Содержание SD260
