![background image](http://html1.mh-extra.com/html/datacard/cp80-plus/cp80-plus_service-manual_3691139235.webp)
CP80 and CP80 Plus Service Manual
6-83
14.
To remove the drive rollers:
A.
Spread the non-gear sidewall of the flipper and pull back on the roller.
B.
Tilt the roller shaft up and withdraw the gear through the opening in the
sidewall.
Replacement Notes
•
The magnetic clutch will not fit into the opening if it is rotated incorrectly.
•
After replacing the flipper assembly in the duplex module, rotate the flipper
until the spring clutch engages the stop tabs (clockwise as viewed from the
motor).
•
If you rotate the flipper counterclockwise you can feel the drag of the spring
clutch, but it will not engage the stop tabs.
•
When the flipper is rotated clockwise, the spring clutch will snap over the
stop tabs and will no longer turn in that direction.
•
Verify that the clutch is properly engaged. When properly engaged, the
flipper will rotate in only one direction.
•
If necessary, adjust the duplex home offset.
•
Print several test cards to verify that the duplex assembly is functioning
properly.
Содержание CP80 Plus
