Data Flow Systems Hyper SCADA HSS001, Быстрый старт

Страница: 6 / 30

HSS001 Quick Start Guide
4
install the unit in a horizontal position or lay the unit down on its front, top,
back, or sides.
The HSS is designed to operate in an air conditioned, moisture-free, office-type
environment [41-86°F (5-30°C)]. When selecting an installation site, make sure
that it provides an acceptable environment.
There are four mounting bosses on the back of the unit for attaching the
brackets to the enclosure. Attach the four (4) mounting brackets to the back of
the HSS’ enclosure using the supplied screws. Use all four brackets to ensure
that the unit will be securely mounted. The mounting brackets may be aligned
vertically or horizontally. After attaching the brackets to the enclosure, securely
fasten the HSS to the wall in the desired location.
Connect HSS to LAN / Master Workstation
The HSS includes a NIM when using the unit’s COM ports to connect to serial-
type devices. A FIM/NFM is required in place of a NIM when the unit is
connected to a Tunnel CTU.
When connecting the HSS to a local area network through a device such as a
hub, switch, or router, or to a dedicated master workstation, connect any
unused port on the NSM to a port on the other device.
HSS with NIM
1 2
COM2 COM1
1
2
3
4
TELEPHONE
LINES
AUDIO
OUT
AC
POWER
To Local Area Network/
Dedicated Master Workstation
H
S
M
0
0
1 N
I
M
0
0
1 N
S
M
0
0
1 P
S
M
0
0
3