HSS001 Quick Start Guide
10
We recommend that you keep the keyboard and monitor attached to the HSM
until you verify that you can communicate with the HSM from a Windows
workstation.
Note:
NIMs and FIMs are designed to reset themselves and obtain an IP
address after detecting that network communications have been lost and then
restored. If you change the HSM's IP address and want to speed up this
process, you can manually cycle power to all of the telemetry system's NIMs
and FIMs (for example, those in the system's Network RTUs and Tunnel
CTUs).
Configure Hosts file on Windows Workstation
The hosts file allows you to associate a name with an IP address. After the
hosts file has been configured, you can launch Internet Explorer and simply
type
ht3
in the Address box to connect to HT3.
1.
On the Window's taskbar, click the
Start
button, and then click
Run
.
2.
In the
Run
box, type one of the following (depending on your OS level):
For Windows XP or newer, type:
edit c:\windows\system32\drivers\etc\hosts
For Windows 2000/NT, type:
edit c:\winnt\system32\drivers\etc\hosts
3.
In the hosts file, place your cursor on a line below the file’s comments
[lines preceded by a pound sign (#)] and do the following:
A.
Type
xxx.xxx.xxx.xxx
(where xxx.xxx.xxx.xxx represents the Hyper
SCADA Server’s IP address).
B.
Press the Tab key
C.
Type
ht3
Содержание Hyper SCADA HSS001
Страница 16: ...HSS001 Quick Start Guide 14 6 Verify that all of the above information is correct and click OK ...
Страница 28: ...HSS001 Quick Start Guide 26 Notes ...
Страница 29: ...HSS001 Quick Start Guide 27 Notes ...
Страница 30: ...Data Flow Systems Inc 605 N John Rodes Blvd Melbourne FL 32934 321 259 5009 www dataflowsys com ...
