Data Flow Systems Hyper SCADA HSS001, Быстрый старт, Страница: 14 / 30

HSS001 Quick Start Guide
12
Start HT3
1. When installation of the plug-ins and the Java policy file is complete, type
ht3 in Internet Explorer's Address box.
2. On the HT3 login page, enter your Login and Password and click OK .
3. Bookmark HT3 in your browser or create a shortcut to HT3 on your
desktop.
Configure Remote System Backup
HT3 features an automated backup routine that protects your system from
critical data loss. Data is copied and stored locally in a designated backup
folder on the Hyper Server Module (HSM).
As an additional protection against data loss, a Windows workstation can be
configured as a remote backup location. A remote backup site protects you
from loss of data in the event of an HSM hardware failure (the HSM itself stops
functioning). The designated backup workstation should be equipped with a
hard drive large enough to hold all of the system's backup data and must be
configured as a remote backup location. (We recommend that the remote
Windows backup machine have at least 5 gigabytes of free disk space.)
Backup is performed daily at a few minutes after midnight. The system first
makes a local copy of the data (stored on the Hyper Server Module). It then
attempts to locate the remote backup computer.
For remote backup to occur, the designated Windows workstation must be on
and running. It is recommended that all power management be disabled (i.e.,
the network card is not allowed to sleep).
If HT3 does not find the remote location, it skips the creation of a remote copy.
It will not attempt another remote backup until the following midnight. An
entry is made in the current day's Access Log to indicate if the previous day's
backup succeeded or failed.
More information on critical data redundancy, including data recovery, can be
found in the Hyper SCADA Server Installation & Operation Manual.
1. If the backup directory is to be on a Windows NT/2000, or Windows XP or
newer machine, it is recommended that a new user account be created on
the machine.
2. Create a backup folder, or directory, on the Windows workstation that has
been designated as the remote backup.
3. Share the backup folder. (Refer to your Windows Help for information on
sharing folders.)
Windows 98/ME:
A.
Select Full for Access Type .