Data Flow Systems Hyper SCADA HSS001, Быстрый старт

Страница: 13 / 30

HSS001 Quick Start Guide
11
4. Select Save As from the File menu. Verify that the name hosts appears in
the File Name field and click OK .
Verify Connection to HSM
After the hosts file has been created and saved, use the ping command to verify
that your computer can connect to the Hyper SCADA Server using the
assigned host name.
1. On the Windows taskbar, click the Start button, and then click Run .
2. Type ping ht3 in the Run dialog box and click OK .
3. A DOS window appears on screen and indicates if a reply has been
received from the Hyper SCADA Server. A message similar to "Reply from
xxx.xxx.xxx.xxx: bytes = 32 time < 1 ms TTL = 64" (where xxx.xxx.xxx.xxx
represents the Hyper SCADA Server's IP address) indicates that the HSS
responded.
Connect to HT3
Modify Browser Settings
Several changes must be made to Internet Explorer's security settings before
you can successfully run HT3.
1. Start Internet Explorer.
2. Select Internet Options from the Tools menu.
3. Click the Security tab and select the Local intranet zone .
4. Click Custom Level .
5. In the Security Settings dialog box, enable the following:

All of the options listed under ActiveX controls and plug-ins .

All of the options listed under Cookies .
6. Click OK at the Security Settings dialog box.
7. Click OK at the Internet Options dialog box.
Install Plug-Ins and Java Policy File
1. Start Internet Explorer and type ht3 in the Address box.
2. If the necessary plug-ins are not already installed, the HT3 Plug-Ins page is
loaded. (
Note : If the HT3 Plug-Ins page does not automatically load, type
http://ht3/ht3/plugins/index.html in Internet Explorer's Address box.)
3. Follow the instructions on the page to install the required HT3 files and
plug-ins.