Data Flow Systems Hyper SCADA HSS001, Быстрый старт

Страница: 3 / 30

HSS001 Quick Start Guide
1
This document describes the basic procedures for cabling and configuring the
Hyper SCADA Server (HSS001). For detailed cabling and installation
information, see the Hyper SCADA Server Installation and Operation Manual,
available for download from DFS’ web site (www.dataflowsys.com). For
detailed information on configuring the HT3 SCADA software, see the HT3
User Guide (available from within the HT3 software and also available on the
DFS website).
Parts List
Hyper SCADA Server (HSS002-1 or HSS002-2), which includes the following
components:

One Hyper Server Module (HSM)

One 100 W Power Supply Module (PSM)

One on the following: Network Interface Module (NIM); Fiber Interface
Module (FIM); or Network Fiber Module (NFM)

One Network Switch Module (NSM)

One 3.0 AH battery

Two telephone line connectors

Two serial ports

One RCA mono jack

AC power cord (10 feet) (optional power cord plug is available)

4 (four) mounting brackets

4 (four) mounting screws

Hyper SCADA Server Quick Start Guide
What You'll Need

Two (2) static IP addresses - one for the HSM and one for the NIM

(Optional) One (1) static IP address for a Tunnel CTU

CAT5 cables terminated with RJ-45 connectors

Telephone cable terminated with RJ-11 connectors

Computer with Windows operating system installed

PS-2 keyboard and VGA monitor (for connecting to HSM when
configuring IP address)