Data Flow Systems Hyper SCADA HSS001, Быстрый старт

Страница: 4 / 30

HSS001 Quick Start Guide
2
Installation Checklist

Mount HSS001 to wall
 Connect to network or primary workstation
 Connect to serial device(s)
 Configure NIM’s IP address

Connect telephone lines for dial in and dial out

Connect audio device (optional)
 Connect external alarm light/horn (optional)
 Connect power
 Connect keyboard and monitor to HSM and configure HSM’s IP address

Configure hosts file on workstation
 Connect to HT3 (modify browser settings; install plug-ins and java policy
file; start HT3)
 Configure remote system backup location
WARNING
The HSS should only be installed and serviced by DFS personnel or other
qualified technicians.
The HSS must be installed in accordance with all national and local wiring
rules.
The rated voltage and current for the HSS001 are 120 VAC and 2 Amperes
Workstation Specifications
With the HT3 system, you can use Windows-based computers, or workstations,
to access the Hyper SCADA Server (HSS). The HSS is a Linux-based server that
runs the HT3 SCADA software and MySQL database. You can have multiple
Windows workstations connected to the HSS through a local area network. A
Windows-based workstation provides you with access to all HT3 functions.
We recommend that one computer be designated as a dedicated primary
workstation. This computer's main function would be to interface with the HSS
and would remain on at all times.
Minimum Requirements for a Workstation Computer*

Windows XP with SP2

Internet Explorer 8.0

Java 1.5
*Microphone required for recording voice alarm announcements