Data Flow Systems Hyper SCADA HSS001, Быстрый старт

Страница: 10 / 30

HSS001 Quick Start Guide
8
Two Telephone Line Setup
Follow these instructions when using two separate telephone lines for the Call
Out and Call In functions.
1. From your telephone room or telephone wall jack, locate line 1's and line
2's tip and ring wires. Terminate each line's tip and ring wires using an
RJ11 modular telephone connector.
2. Plug the line that will handle call out (911 calls) in the LINE 1 jack. The
LINE 1 jack is prewired to the Line 1 termination points on the HSM’s card
edge.
3. Plug the line that will handle call in (411 calls) in the LINE 2 jack. The
LINE 2 jack is prewired to the Line 2 termination points on the HSM’s card
edge.
+
H
S
M
0
0
1 N
I
M
0
0
1 N
S
M
0
0
1 P
S
M
0
0
3
BATTERY
COM2 COM1
1 2
TEL.
LINES AUDIO
OUT
AC
POWER
S
O
UR
CE
LO
A
D
ALARM
TERMINALS
To Wall Jack /
Telephone Room
CALL IN (411) LINE
CALL OUT (911) LINE
Connect HSS to Audio Device (optional)
The HSS' RCA mono jack (Audio Out) may be used to connect an audio device,
for example, a PA system, an amplifier-plus-speaker system, or amplified
speaker(s), to the HSS. With this type of set up, alarm announcements can be
heard remotely in addition to being heard at the workstations.
Before connecting the HSS to a sound system:

Ensure that the sound system has its own power source. Do not use the
HSS to power the sound system.

Turn off the sound system's power. This helps prevent damage to
speakers as well as to any connected equipment.