Data Aire dap4 touch, Инструкция по установке, эксплуатации и обслуживанию

Страница: 38 / 112

38 • dap4 User Manual
Dehum Mode: None
1C In Limit (1 compressor & within reheat limits)
2C In Limit (2 compressors & within reheat limits)
1C No Limit (1 compressor & no reheat limits)
2C No Limit (2 compressors & no reheat limits)
Once a selection or selections have been made, move the cursor to the title block by pressing the
ENTER key or press the Esc key to return normal operating mode
Press the DOWN key to view the next screen:
The following will be displayed (input is for reference only):
Available Selections: Yes or No
Note: Selecting YES will reset all values back to the factory settings (default).
If YES is selected, the following message will be displayed: “wait resetting” (resetting will take a
few seconds). Once set the display will have the following message:
Power down the unit using the unit mounted electrical disconnect or the (field provided)
wall mounted disconnect.
Once the self-test is complete, the display module will display that the unit is “OFFbyKEY”
Start (power-up) the unit following the instructions on page 10, Powering the Unit ON/OFF.
Initialization
DEFAULT INSTALLATION
Erase user settings
and stall global
default values:
NO
Warning
INITIALIZATION DONE
switch-off unit
to confirm data